Antioxidant capacity sources of soils under different land uses.

Antioxidants (AOX) in soils originate mainly from secondary plant metabolites and are pivotal in many redox processes in environment, maintaining soil quality. Still, little is known about the influence of land uses on their accumulation in soil. The aim of the paper was to determine the content of these redox-active compounds in the extracts of A horizons of abandoned fallows, arable and woodland soils. Total antioxidant capacity (TAC) of soils under various uses and vegetation was evaluated in different soil extracts using Folin-Ciocâlteu method. The contribution of humic acids to TAC was determined and antioxidant profiles estimated using the chromatographic GC-MS method. Forest soils exhibited the highest TAC (15.5 mg g-1) and AOX contents (4.34 mg g-1), which were positively correlated with soil organic carbon content. It was estimated that humic acids contribute to over 50% of TAC in soils. The main phenolics in woodland A horizons were isovanillic and p-hydroxybenzoic acid (p-HA), while esculetin and p-HA predominated in the abandoned fallows due to the prevalence of herbaceous vegetation. Cultivated soils were the most abundant in p-HA (56.42%). In the studied topsoils, there were considerable amounts of aliphatic organic matter, which role in redox processes should be further evaluated.

Linking the humification of organic amendments with size aggregate distribution: Insights into molecular composition using FT-ICR-MS.

Soil organic matter (SOM) plays a pivotal role in enhancing physical and biological characteristics of soil. Humic substances constitute a substantial proportion of SOM and their increase can improve crop yields and promote agricultural sustainability. While previous research has primarily assessed the influence that humic acids (HAs) derived from natural water have on soil structure, our study focuses on the impact of HAs on soil aggregation under different fertilizer regimes. During the summer cropping season, maize was cultivated under organic and synthetic fertilizer treatments. The organic fertilizer treatment utilized barley (Hordeum vulgare L.) and hairy vetch (Vicia villosa R.) as an organic amendment five days prior to maize planting. The synthetic treatment included a synthetic fertilizer (NPK) applied at South Korea's recommended rates. The organic treatment resulted in significant improvements in the soil aggregates and stability (mean weight diameter, MWD; p < 0.05) compared to the synthetic fertilizer application. These improvements could be primarily attributed to the increased quantity and quality of HAs in the soil derived from the organic amendment. The amount of extracted HAs in the organic treatment was nearly twice that of the synthetic treatment. Additionally, the organic treatment had a 140 % larger MWD and a 40 % increase in total phenolic content compared to the synthetic treatment. The organic treatment also had an increased macronutrient uptake (p < 0.001), an 11 % increase in aboveground maize biomass, and a 21 % increase in grain yield relative to the synthetic treatment. Thus, the enhancement of HA properties through the incorporation of fresh organic manure can both directly and indirectly increase crop productivity.

Spectral characterization of the impact of modifiers and different prepare temperatures on snow lotus medicinal residue-biochar and dissolved organic matter.

This study involved the production of 20 biochar samples derived from secondary medicinal residues of Snow Lotus Oral Liquid, processed within the temperature range of 200-600 °C. Additionally, four medicinal residues, including dissolved organic matter (DOM), from 24 samples obtained using the shaking method, served as the primary source material. The investigation focused on two key factors: the modifier and preparation temperature. These factors were examined to elucidate the spectral characteristics and chemical properties of the pharmaceutical residues, biochar, and DOM. To analyze the alterations in the spectral attributes of biochar and medicinal residues, we employed near-infrared spectroscopy (NIR) in conjunction with Fourier-infrared one-dimensional and two-dimensional correlation spectroscopy. These findings revealed that modifiers enhanced the aromaticity of biochar, and the influence of preparation temperature on biochar was diminished. This observation indicates the stability of the aromatic functional group structure. Comparative analysis indicated that Na2CO3 had a more pronounced structural effect on biochar, which is consistent with its adsorption properties. Furthermore, we utilized the fluorescence indices from UV-visible spectroscopy and excitation-emission-matrix spectra with the PARAFAC model to elucidate the characteristics of the fluorescence components in the DOM released from the samples. The results demonstrated that the DOM released from biochar primarily originated externally. Aromaticity reduction and increased decay will enhance the ability of the biochar to bind pollutants. Those results confirmed the link between the substantial increase in the adsorption performance of the high-temperature modified charcoal in the previous study and the structural changes in the biochar. We investigated the structural changes of biochar and derivative DOM in the presence of two perturbing factors, modifier and preparation temperature. Suitable modifiers were selected. Preparation for the study of adsorption properties of snow lotus medicinal residues.

Biological and chemical characterization in relation to the yield of radish (Raphanus sativus L.) nourished with humus from plant residues.

The increase in prices of fertilizers, energy and other materials necessary for the industry triggered a global economic crisis. Reason that was investigated on the biological and chemical characteristics in relation to the yield of radish nourished with humus from plant residue. The objective was to determine the appropriate dose of humus to obtain greater yield and its relationship with the chemical and biological characteristics of the radish. It is based on applied methodology with an experimental approach; Therefore, the Completely Random Block Design model was used, which consisted of 3 blocks and 5 treatments that were T1 with 0, T2 with 4, T3 with 6, T4 with 8 and T5 with 10 t/ha of humus and They applied 15 days after sowing. The physical characteristics of the radish were evaluated and processed using analysis of variance and Duncan. Concentration of elements in leaves and stomatal density were also analyzed. It was determined that T5 stood out in total plant length with 28.95 cm, plant weight with 76.87 g, equatorial diameter with 4,404 cm and commercial yield with 20,296 t/ha. Nitrogen consumption in relation to yield with 247.44 kg/ha. Stomatal density 459 stomata/mm2 and profitability with 150% and nutrient concentration in leaves highlighted T4 with N, K, Ca, Mg, Mo and Zn. It concludes that T5 stood out with 20,296 t/ha, which differed by 26.04% in relation to the control (T1) with 15,011 t/ha. Therefore, this dose added nutrients to the soil that improved the availability for plant absorption and this influenced the concentration of nutrients in leaves such as N, P and Fe and stomatal density with 459 stomata/mm2, which had a response in good development, strengthening against environmental stress and therefore greater performance.

The promotion of the atrazine degradation mechanism by humic acid in a soil microbial electrochemical system.

The enhancing effects of anodes on the degradation of the organochlorine pesticide atrazine (ATR) in soil within microbial electrochemical systems (MES) have been extensively researched. However, the impact and underlying mechanisms of soil microbial electrochemical systems (MES) on ATR degradation, particularly under conditions involving the addition of humic acids (HAs), remain elusive. In this investigation, a soil MES supplemented with humic acids (HAs) was established to assess the promotional effects and mechanisms of HAs on ATR degradation, utilizing EEM-PARAFAC and SEM analyses. Results revealed that the maximum power density of the MES in soil increased by 150%, and the degradation efficiency of ATR improved by over 50% following the addition of HAs. Furthermore, HAs were found to facilitate efficient ATR degradation in the far-anode region by mediating extracellular electron transfer. The components identified as critical in promoting ATR degradation were Like-Protein and Like-Humic acid substances. Analysis of the microbial community structure indicated that the addition of HAs favored the evolution of the soil MES microbial community and the enrichment of electroactive microorganisms. In the ATR degradation process, the swift accumulation of Hydrocarbyl ATR (HYA) was identified as the primary cause for the rapid degradation of ATR in electron-rich conditions. Essentially, HA facilitates the reduction of ATR to HYA through mediated bonded electron transfer, thereby markedly enhancing the efficiency of ATR degradation.

Mechanical energy triggered piezo-catalyzation of Bi2WO6 nanoplates on ferrate (Fe(VI)) oxidation in alkaline media: Performance and mechanism.

Piezo-electricity, as a unique physical phenomenon, demonstrates high effectiveness in capturing the environmental mechanical energy into polarization charges, offering the possibility to activate the advanced oxidation processes via the electron pathway. However, information regarding the intensification of Fe(VI) through piezo-catalysis is limited. Therefore, our study is the first to apply Bi2WO6 nanoplates for piezo-catalyzation of Fe(VI) to enhance bisphenol A (BPA) degradation. Compared to Fe(VI) alone, the Fe(VI)/piezo/Bi2WO6 system exhibited excellent BPA removal ability, with the degradation rate increased by 32.6% at pH 9.0. Based on the experimental and theoretical results, Fe(VI), Fe(V), Fe(IV) and •OH were confirmed as reaction active species in the reaction, and the increased BPA removal mainly resulted from the enhanced formation of Fe(IV)/Fe(V) species. Additionally, effects of coexisting anions (e.g., Cl-, NO3-, SO42- and HCO3-), humic acid and different water matrixes (e.g., deionized water, tap water and lake water) on BPA degradation were studied. Results showed the Fe(VI)/piezo/Bi2WO6 system still maintained satisfactory BPA degradation efficiencies under these conditions, guaranteeing future practical applications in surface water treatment. Furthermore, the results of intermediates identification, ECOSAR calculation and cytotoxicity demonstrated that BPA degradation by Fe(VI)/piezo/Bi2WO6 posed a diminishing ecological risk. Overall, these findings provide a novel mechanical energy-driven piezo-catalytic approach for Fe(VI) activation, enabling highly efficient pollutant removal under alkaline condition.

Effect of pyrolysis temperature and molecular weight on characterization of biochar derived dissolved organic matter from invasive plant and binding behavior with the selected pharmaceuticals.

A comprehensive understanding of the characteristics of biochar released-dissolved organic matter (BDOM) derived from an invasive plant and its impact on the binding behavior of pharmaceuticals is essential for the application of biochar, yet has received less attention. In this study, the binding behavior of BDOM pyrolyzed at 300-700 °C with sulfathiazole, acetaminophen, chloramphenicol (CAP), and carbamazepine (CMZ) was investigated based on a multi-analytical approach. Generally, the pyrolysis temperature exhibited a more significant impact on the spectral properties of BDOM and pharmaceutical binding behavior than those of the molecular weight. With increased pyrolysis temperature, the dissolved organic carbon decreased while the proportion of the protein-like substance increased. The highest binding capacity towards the drugs was observed for the BDOM pyrolyzed at 500 °C with the molecular weight larger than 0.3 kDa. Moreover, the protein-like substance exhibited higher susceptive and released preferentially during the dialysis process and also showed more sensitivity and bound precedingly with the pharmaceuticals. The active binding points were the aliphatic C-OH, amide II N-H, carboxyl CO, and phenolic-OH on the tryptophan-like substance. Furthermore, the binding affinity of the BDOM pyrolyzed at 500 °C was relatively high with the stability constant (logKM) of 4.51 ± 0.52.

Photo-induced leaching behaviors and biodegradability of dissolved organic matter from microplastics and terrestrial-sourced particles.

Recent studies have increasingly focused on the occurrence of plastic leachate and its impacts on aquatic ecosystems. Nonetheless, the environmental fate of this leachate in the presence of abundant natural organic matter (NOM)-a typical scenario in environments contaminated with plastics-remains underexplored. This study investigates the photo-induced leaching behaviors of dissolved organic matter (DOM) from terrestrial-sourced particles (forest soil and leaf litter) and microplastics (MPs), specifically polystyrene (PS) and polyvinyl chloride (PVC), over a two-week period. We also examined the biodegradability and spectroscopic characteristics of the leached DOM from both sources. Our results reveal that DOM from microplastics (MP-DOM) demonstrates more persistent leaching behavior compared to terrestrial-derived DOM, even with lesser quantities per unit of organic carbon. UV irradiation was found to enhance DOM leaching across all particle types. However, the photo-induced leaching behaviors of fluorescent components varied with the particle type. The MP group exhibited a broader range and higher biodegradability (ranging from 19.7% to 61.6%) compared to the terrestrial-sourced particles (ranging from 3.7% to 16.5%). DOM leached under UV irradiation consistently showed higher biodegradability than that under dark conditions. Furthermore, several fluorescence characteristics of DOM, such as the protein/phenol-like component (%C2), terrestrial humic-like component (%C3), and humification index (HIX)-traditionally used to indicate the biodegradability of natural organic matter-were also effective in assessing MP-DOM (with correlation coefficients R2 = 0.6055 (p = 0.003), R2 = 0.5389 (p = 0.007), and R2 = 0.4640 (p = 0.015), respectively). This study provides new insights into the potential differences in environmental fate between MP-DOM and NOM in aquatic environments heavily contaminated with MPs.

Spectroscopic studies of the role of dissolved organic matter in acenaphthene photodegradation in liquid water and ice.

The effect of concentration and origin of dissolved organic matter (DOM) on acenaphthene (Ace) photodegradation in liquid water and ice was investigated, and the components in DOM which were involved in Ace photodegradation were identified. The DOM samples included Suwannee River fulvic acid (SRFA), Elliott soil humic acid (ESHA), and an effluent organic matter (EfOM) sample. Due to the production of hydroxyl radical (•OH) and triplet excited-state DOM (3DOM*) which react with Ace, DOM had promotion effects on Ace photodegradation. However, the promotion effects of DOM were prevailed over by their suppressing effect of DOM including screening light effect, intermediates reducing effect and RS quenching effect, and thus, the photodegradation rates of Ace decreased in the presence of the three DOM with concentrations of 0.5-7.5 mg C/L in liquid water and ice. ESHA had higher light absorption and thus had higher screening light effect on Ace photodegradation in liquid water than SRFA and EfOM. At each DOM concentration, ESHA exhibited higher promotion effect on Ace photodegradation than SRFA and EfOM, in liquid water and ice. The binding of Ace with DOM was indicated by decreases in fluorescence intensity of Ace when coexisted with DOM. However, the binding of Ace to DOM played an unimportant role in suppressing Ace photodegradation. The photodegradation behavior of fluorophores in Ace with DOM present in ice was not similar to that in liquid water. C-O, C═O, carboxyl groups O-H and aliphatic C-H functional groups in DOM were involved in the interaction of DOM with Ace. The presence of Ace seemed to have no influence on the photodegradation behavior of functional groups in DOM.

Fulvic acid more facilitated the soil electron transfer than humic acid.

Humus substances (HSs) participate in extracellular electron transfer (EET), which is unclear in heterogeneous soil. Here, a microbial electrochemical system (MES) was constructed to determine the effect of HSs, including humic acid, humin and fulvic acid, on soil electron transfer. The results showed that fulvic acid led to the optimal electron transfer efficiency in soil, as evidenced by the highest accumulated charges and removal of total petroleum hydrocarbons after 140 days, with increases of 161% and 30%, respectively, compared with those of the control. However, the performance of MES with the addition of humic acid and humin was comparable to that of the control. Fulvic acid amendment enhanced the carboxyl content and oxidative state of dissolved organic matter, endowing a better electron transfer capacity. Additionally, the presence of fulvic acid induced an increase in the abundance of electroactive bacteria and organic degraders, extracellular polymeric substances and functional enzymes such as cytochrome c and NADH synthesis, and the expression of m tr C gene, which is responsible for EET enhancement in soil. Overall, this study reveals the mechanism by which HSs stimulate soil electron transfer at the physicochemical and biological levels and provides basic support for the application of bioelectrochemical technology in soil.

Effect of pyrolysis temperature on the binding characteristics of DOM derived from livestock manure biochar with Cu(II).

Biochar-derived dissolved organic matter (BDOM) has the potential to influence the environmental application of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from livestock manure biochar at different pyrolysis temperatures with Cu(II) were investigated based on a multi-analytical approach. The results showed that the DOC concentration, aromatics, and humification degree of BDOM were higher in the process of low pyrolysis of biochar. The pyrolysis temperature changed the composition of BDOM functional groups, which affected the binding mechanism of BDOM-Cu(II). Briefly, humic-like and protein-like substances dominated BDOM-Cu(II) binding at low and high pyrolysis temperatures, respectively. The higher binding capacity for Cu(II) was exhibited by BDOM derived from the lower pyrolysis temperature, due to the carboxyl as the main binding site in humic acid had high content and binding ability at low-temperature. The amide in proteins only participated in the BDOM-Cu(II) binding at high pyrolysis temperature, and polysaccharides also played an important role in the binding process. Moreover, the biochar underwent the secondary reaction at certain high temperatures, which led to condensation reaction of the aromatic structure and the conversion of large molecules into small molecules, affecting the BDOM-Cu(II) binding sites.

Leaching behaviors of dissolved organic matter from face masks revealed by fluorescence EEM combined with FRI and PARAFAC.

Despite numerous studies investigating the occurrence and fate of microplastics, no effort has been devoted toward exploring the characteristics of dissolved organic matter (DOM) leached from face masks mainly made of plastics and additives used in large quantities during the COVID-19 pandemic. By using FTIR, UV-vis, fluorescence EEM coupling with FRI and PARAFAC, and kinetic models of leaching experiments, we explored the leaching behaviors of face mask-derived DOM (FM-DOM) from commonly used face masks including N95, KN95, medical surgical masks, etc. The concentration of FM-DOM increased quickly at early 0-48 h and reached equilibrium at about 48 h measured in terms of dissolved organic carbon and fluorescence intensity. The protein-like materials ranged from 80.32 % to 89.40 % of percentage fluorescence response (Pi,n) were dominant in four types of FM-DOM analyzed by fluorescence EEM-FRI during the leaching experiments from 1 to 360 h. Four fluorescent components were identified, which included tryptophan-like components, tyrosine-like components, microbial protein-like components, and fulvic-like components with fluorescence EEM-PARAFAC models. The multi-order kinetic model (Radj2 0.975-0.999) fitted better than the zero-order and first-order kinetic model (Radj2 0.936-0.982) for all PARAFAC components of FM-DOM based on equations derived by pseudo kinetic models. The leaching rate constants (kn) ranged from 0.058 to 30.938 and the half-life times (T1/2) ranged from 2.73 to 24.87 h for four FM-DOM samples, following the solubility order of fulvic-like components (C4) > microbial protein-like components (C3) > tryptophan-like components (C1) > tyrosine-like components (C2) for FM-DOM from four types of face masks during the leaching experiment from 0 to 360 h. These novel findings will contribute to the understanding of the underappreciated environment impact of face masks in aquatic ecosystems.

Understanding microplastic aging driven by photosensitization of algal extracellular polymeric substances.

The aging of microplastics (MPs) is extremely influenced by photochemically-produced reactive intermediates (PPRIs), which are mediated by natural photosensitive substances. Algal extracellular polymeric substances (EPS) can produce PPRIs when exposed to sunlight. Nonetheless, the specific role of EPS in the aging process of MPs remains unclear. This work systematically explored the aging process of polystyrene (PS) MPs in the EPS secreted by Chlorella vulgaris under simulated sunlight irradiation. The results revealed that the existence of EPS accelerated the degradation of PS MPs into particles with sizes less than 1 µm, while also facilitating the formation of hydroxy groups on the surface. The release rate of dissolved organic matter (DOM) from PS MPs was elevated from 0.120 mg·L-1·day-1 to 0.577 mg·L-1·day-1. The primary factor contributing to the elevated levels of DOM was humic acid-like compounds generated through the breakdown of PS. EPS accelerated the aging process of PS MPs by primarily mediating the formation of triplet excited states (3EPS*), singlet oxygen (1O2), and superoxide radicals (O2∙-), resulting in indirect degradation. 3EPS* was found to have the most substantial impact. This study makes a significant contribution to advance understanding of the environmental fate of MPs in aquatic environments impacted by algal blooms.

Adsorption of humic acid from different organic solid waste compost to phenanthrene, is fluorescence excitation or quenching?

Humic acid (HA) from different organic solid waste (OSW) compost has been shown good adsorption properties for phenanthrene. However, the raw material of HA can affect its structure, resulting in differences in adsorption capacity. Therefore, this study focused on the adsorption characteristics of phenanthrene by HA from different OSW compost. In this work, chicken manure (CM), rice straw (RS) and lawn waste (LW) were selected as sources of composted HA. The adsorption mechanism of HA from different OSW compost were revealed through analytical techniques including three-dimensional fluorescence spectroscopy (EEM), two-dimensional correlation spectroscopy (2DCOS), and Fourier-transform infrared spectroscopy (FTIR). The results suggested that HA from LW compost had a better adsorption affinity for phenanthrene because of its more complex fluorescent component, where C1 as a simple component determined the adsorption process specifically. Furthermore, after HA from LW compost adsorbed phenanthrene, the increase in aromatic -COOH and -NH was the main reason for fluorescence quenching. These results indicated that HA from LW compost had better adsorption effect for phenanthrene. The results of this study were expected to provide a selection scheme for the control of phenanthrene pollution and environmental remediation.

Influences of dissolved organic matters on the adsorption and bioavailability of sulfadiazine: Molecular weight- and type-dependent heterogeneities.

The bioavailability of contaminants in aquatic environments was highly related with the existing forms (soluble or adsorbed) and properties of dissolved organic matters (DOMs). In this study, the molecular weight (MWs)-dependent effects of DOMs on the adsorption and bioavailability of sulfadiazine were explored. Colloid ZnO and Al2O3 were employed as the representative colloidal particles, and algae-derived organic matter (AOM) and humic acid (HA) were selected as typical autochthonous and allochthonous DOMs. The ultrafiltration procedure was applied to divide the bulk DOMs into high MW (HMW-, 1 kDã0.45 µm) and low MW (LMW-, <1 kDa) fractions. Results showed that HMW-DOM contained more aromatic and protein-like substances as compared to the LMW counterparts. In addition, presence of AOM promoted sulfadiazine adsorption capabilities by 1.19-4.54 folds and mitigated the inhibition ratio by 0.56-0.78 folds, whereas those of HA inhibited sulfadiazine adsorption by 0.27-0.84 folds and enhanced the biotoxicity by 1.21-1.45 folds. Regardless of different DOM types, HMW-fraction exhibited highest effects on sulfadiazine adsorption and bioavailability, followed by the bulk- and LMW-fractions. Two-dimensional correlation spectroscopy showed that sulfadiazine was adsorbed on colloidal surfaces prior to AOM, and the subsequent adsorption of AOM can provide additional sites for sulfadiazine adsorption, which decreased the concentrations of aqueous sulfadiazine as well as the biotoxicity to Microcystis aeruginosa (M. aeruginosa). The HA, however, was preferentially adsorbed on colloidal surfaces, which hindered the subsequent sulfadiazine adsorption and resulted in a high sulfadiazine abundance in aqueous solution as well as the enhanced biotoxicity to M. aeruginosa. This study highlighted the importance of the types and MWs of DOMs in influencing the behaviors and ecological effects of aquatic contaminants.

The effects of different electrode materials on the electric field-assisted co-composting system for the soil remediation of heavy metal pollution.

The electric field-assisted composting system (EACS) is an emerging technology that can enhance composting efficiency, but little attention has been given to electrode materials. Herein, an EACS was established to investigate the effects of electrode materials on humic substance formation and heavy metal speciation. Excitation-emission matrix analysis showed that carbon-felt and stainless-steel electrodes increased humic acid (HA) by 48.57 % and 47.53 %, respectively. In the EACS with the carbon-felt electrode, the bioavailability factors (BF) of Cu and Cr decreased by 18.00 % and 7.61 %, respectively. Despite that the stainless-steel electrodes decreased the BF of As by 11.26 %, the leaching of Cr, Ni, Cu, and Fe from the electrode itself is an inevitable concern. Microbial community analyses indicated that the electric field increased the abundance of Actinobacteria and stimulated the multiplication of heavy metal-tolerant bacteria. Redundancy analysis indicates that OM, pH, and current significantly affect the evolution of heavy metal speciation in the EACS. This study first evaluated the metal leaching risk of stainless-steel electrode, and confirmed that carbon-felt electrode is environment-friendly material with high performance and low risk in future research with EACS.

Identifying the Stripping of Oxide Debris from Graphene Oxide: Evidence from Experimental Analysis and Molecular Simulation.

In this study, characteristics of oxidation debris (OD) and its stripping mechanism from graphene oxide (GO) were explored. The results demonstrated that OD contains three components, namely, protein-, fulvic acid-, and humic acid-like substances; among these, protein-like substances with lower molecular weight and higher hydrophilicity were most liable to be stripped from GO and were the primary components stripped from GO at pH < 10, whereas humic acid- and fulvic acid-like substances were stripped from GO at pH > 10. During the stripping of OD, hydrogen bonds from carboxyl and carbonyl were the first to break, followed by hydrogen bonds from epoxy. Subsequently, π-π interactions were broken, and hydrogen bond interactions induced by hydroxyl groups were the hardest to break. After the stripping of OD, the recombination of OD on GO was observed, and regions containing relatively fewer oxygen-containing functional groups were favorable binding sites for the readsorbed OD. The stripping and recombination of OD on GO resulted in an uneven GO surface, which should be considered during the development of GO-based environmental materials and the evaluation of their environmental behavior.

Characteristics of DOM and bacterial community in rural black and odorous water bodies under different dimensions.

Analysis of dissolved organic matter (DOM) composition and microbial characteristics is crucial for tracing the sources of rural black and odorous water bodies (BOWB). The aim of this study was to explore the DOM and microbial diversity and identify the primary environmental factors in BOWB from various pollution sources during different periods using EEMs-PARAFAC and Illumina sequencing. It was found that the physicochemical properties vary widely across different pollution types of BOWB, with higher overall content during the high-water period compared to the normal-water period. The types of dissolved organic matter in BOWB are Tyrosine proteins, Fulvic acid, Dissolved microbial metabolites, and Humic acid. During the normal-water period, DOM originates primarily from terrestrial sources in various water bodies. However, DOM affected by livestock and poultry waste and industrial effluents is influenced by both internal and external sources during periods of high water levels. In industrial waste-type BOWB, the biological sources of water are weak. Proteobacteria, Actinobacteria, Chloroflexi, Firmicutes were the dominant bacterial phyla. According to the redundancy analysis, pH (p = 0.047), Total nitrogen (TN) (p = 0.045), Organic carbon (OC) (p = 0.044), and Nickel (Ni) (p = 0.047) are the primary environmental factors influencing the composition of bacterial communities.

Inhibiting effects of humic acid on iron flocculation hindered As removal by electro-flocculation on air cathode iron anode.

Activated carbon air cathode combined with iron anode oxidation-flocculation synergistic Arsenic (As) removal was a new groundwater purification technology with low energy consumption and high efficiency for groundwater with high As concentration. The presence of organic matter such as humic acid (HA) had ambiguous effects on formation of organic colloids in the system. The effects of the particle size distribution characteristics of these colloids on the formation characteristics of flocs and the efficiency of As purification was not clear. In this work, we used five different pore size alumina filter membranes to separate mixed phase solutions and studied the corresponding changes in iron and arsenic concentrations in the presence and absence of humic acid conditions. In the presence of HA, the arsenic concentration of < 0.05 µm particle size components was 1.01, 1.28, 3.07, 7.69, 2.85 and 1.24 times of that in the absence of HA. At the same time, the arsenic content in 0.05-0.1 µm and 0.1-0.45 µm particle size components was also higher than that in the system without HA, which revealed that the presence of HA hindered the flocculation behavior of As distribution to higher particle sizes in the early stage of the reaction. The presence of HA affected the flocculation rate of iron flocs from small to large particle size fractions and it had limited effect on the behavior of large-size flocs in adsorption of As. These results provide a theoretical basis for targeted, rapid, and low consumption synergistic removal of arsenic and organic compounds in high arsenic groundwater.

Gaining insight into the effect of laccase expression on humic substance formation during lignocellulosic biomass composting.

The aim is to enhance lignin humification by promoting laccase activities which can promote lignin depolymerization and reaggregation during composting. 1-Hydroxybenzotriazole (HBT) is employed to conduct laccase mediator system (LMS), application of oxidized graphene (GO) in combination to strengthen LMS. Compared with control, the addition of GO, HBT, and GH (GO coupled with HBT) significantly improved laccase expression and activities (P < 0.05), with lignin humification efficiency also increased by 68.6 %, 36.7 %, and 107.8 %. GH treatment induces microbial expression of laccase by increasing the abundance and synergy of core microbes. The unsupervised learning model, vector autoregressive model and Mantel test function were combined to elucidate the mechanism of action of exogenous materials. The results showed that GO stabilized the composting environment on the one hand, and acted as a support vector to stabilize the LMS and promote the function of laccase on the other. In GH treatment, degradation of macromolecules and humification of small molecules were promoted simultaneously by activating the dual function of laccase. Additionally, it also reveals the GH enhances the humification of lignocellulosic compost by converting phenolic pollutants into aggregates. These findings provide a new way to enhance the dual function of laccase and promote lignin humification during composting. It could effectively achieve the resource utilization of organic solid waste and reduce composting pollution.